TruBurst
Bursting Strength Test
This test method describes the measurement of the resistance of textile fabrics to bursting. The force required to rupture a fabric by distending it with a force applied at right angles to the plane of the fabric under specified conditions. Burst strength is widely used for knit fabrics, non-woven fabrics, and felts wehre the contstructions do not lend themselves to tensile tests. The two basic types of burst tests are the diaphragm method and the ball-burst method.
Feature & Advantage
![](https://thachanhvang.com/wp-content/uploads/2024/04/TruBurst-Standards.jpg)
TESTWISE SOFTWARE
![](https://thachanhvang.com/wp-content/uploads/2024/04/Truburst-Laser.png)
LASER DISTENSION MEASUREMENT
![](https://thachanhvang.com/wp-content/uploads/2024/04/TruBurst-Test.jpg)
TOOL FREE DOME CHANGE
![](https://thachanhvang.com/wp-content/uploads/2024/04/TruBurst-Diaphragm-Correction.jpg)
DIAPHRAGM CORRECTION
![](https://thachanhvang.com/wp-content/uploads/2024/04/TruBurst-Flow-Correction.jpg)
AUTOMATIC FLOW CONTROL CALIBRATION
Specification
Pressure Range | |||||
kPa | psi | kg/cm2 | bar | kN/m3 | |
Upper Pressure Limit | 1000 | 145 | 10.20 | 10 | 1000 |
Resolution | 0.2 | 0.04 | 0.002 | 0.002 | 0.2 |
Distension Range | |||||
mm | cm | inches | |||
Minimum | 0.1 | 0.01 | 0.004 | ||
Maximun | 70.0 | 7.00 | 2.756 | ||
Resolution | 0.1 | 0.01 | 0.004 |
Sign up for advice
- Hotline0938 078 338
- emailinfo@thachanhvang.com